Luggage Racks For my V-strom
Like most people, my life has been made easier by computers and yes, better. In my job as a home inspector, WIN Home Inspection Salem, a computer saves me time and corrects my terrible spelling. A computer provides most of our TV viewing pleasure and keeps me in touch with friends and family. I know for a fact that I would have never written a dozen books if I hadn’t had a laptop computer. Most of my life of being a do it yourselfer has been spent in trial and error. I have spent many hours and lots of money making mistakes because I didn’t have the knowledge to do it right the first time. Now I just go to my computer and Google how to do what ever it is I want to do and I can find it on Youtube. Exploring the internet with my computer has kept me learning and growing like nothing else could have done. And even though I curse them sometimes, a computer has opened the world to me and enhanced my life. God bless you mister or misses computer inventor person(s).
Next to the computer, used plastic 55 gallon barrels would have to be #2 in making my live easier.
After I realized how much I enjoyed dual sport motorcycle riding on my Honda XR650L, I decided that I needed an adventure bike. An adventure bike is a step up from a typical dual sport in that it is comfortable enough to ride long distances on the highways, but when you see a dirt or gravel road that looks interesting, off you go. After a lot of study I decided that the Suzuki V-strom 650DR was the ideal bike for me. I couldn’t really justify the expense of an $5000-$7000 bike. Since I like to work on motorcycles I decided that if I could find a wrecked bike that was mechanically sound I could probably fix it up and make it, at the very least, interesting looking. I had just published a book, The Reincarnation of Joe Rocket. In the book the main character had fallen on hard times and his buddy, Two Stroke, bought him a V-strom that had been wrecked. He spent a couple weeks fixing it up and then rode it from Washington State to Maine. It occurred to me that if Joe Rocket could fix one up, I could too. I put an ad on Craigslist and a week later a guy emailed me saying he had a totaled V-strom that he wanted to sell. The bike was a 2010 with 4500 miles on it. Long story short, the bike looked brand new, except for a broken left front turn light and the shifter lever. There were also a few small scratches that I would have never noticed if he hadn’t pointed them out to me. The guy had been rear ended, tapped, at a stop sign and tipped the bike over. Since the bike was virtually new, he wanted everything with even a minor scratch replaced. By the time the insurance company added it all up, the bike was totaled. I bought it for half the price of a new one and within thirty minutes I had fixed the turn signal light and shifter. So much for a fixer upper project. I love this bike.
I had sold my cruiser, 2002 Honda VTX 1800, the previous winter, so the Vee was going to be my all around bike. I would use for long weekend dual sport trips and my week long road trips. For long trips I needed some kind of saddlebags, or for a adventure bike like the V-strom, panniers. Panniers are usually aluminum boxes that mount to each side of the back fender area. They are made of aluminum to be almost indestructible and watertight. I never liked the idea of big metal boxes mounted to the back of my motorcycle. I guess I have had too many close encounters with trees and boulders and knew I would end up tearing them off my bike or denting them beyond repair. As I searched the web for something I thought would work for me, I found nothing I liked or could afford. I kept thinking, why don’t they make a flexible plastic holder that you can just slip your luggage onto? Then I though, “Hey, I can make that!”
I needed to make a rack that would withstand crashes and that I could mount my plastic luggage holders onto. During searches on the web I had seen many different racks that would mount on my V-strom, but I felt I could do better or at least, as well. I made a rough sketch of what I wanted, found a 10’X3/4” piece of conduit in my shop, bought some 1/8”X 1” metal flat stock at ACE, got out my conduit bender, fired up the welder and went to work.
The first thing I did was bend the conduit so it would attach to the passenger foot peg frame bracket on one side, bend around the back of the bike just under the tail light and attach to the other passenger peg frame bracket. I carefully flattened the ends of the conduit and drill holes for bolts through the flattened part. The frame brackets for the passenger foot pegs on the Vee are large and there was plenty of room to drill a hole in the bracket to accommodate the conduit, bolt and nut.
The Vee comes stock with a substantial back rack that sits over the back fender. It’s bolted on in four places, two bolts attach back rack and two more bolts forward about mid seat. In my opinion, it is always a good idea to use the factory bolts and brackets when ever possible to attach something not stock to your bike.
I cut and bent to fit, two pieces of flat metal stock that would bolt under the back rack front brackets and reach down to the conduit. For the back support, I cut and bent one piece of flat stock that ran from the conduit on once side, up and under the back rack and down to the conduit on the other side. Because of where I had to run the flat stock under the back rack, the bolts for the rack didn’t line up with the flat stock. To make the connection to the bolts I welded two small ears to the flat stock that would reach the two bolts.
The next step was to cut two short pieces of flat stock that would attach horizontally between the two vertical flat stock on each side and would give me something to hang my plastic luggage racks on. Once everything was cut, bent and fitted, I welded it all together and sprayed it with black spray in bed liner.
Now with the rack made and mounted, I needed to make luggage racks. After drawing some sketches of what might work, I made a pattern out of cardboard. I had in mind that I was going to use 20” carry-on luggage to fit in the luggage racks.
Now what I needed was a big flat piece of plastic. Here is something that you might not know. If you cut the top and bottom off a plastic 55 gallon barrel, then cut it down one side, heat it up with a weed burner blow torch until it is so soft it will lay flat on a shop floor and put a piece of plywood with some heavy weight on the plywood over the plastic until it cools, you will end up with a large piece of flat plastic.
After cutting the plastic to the pattern, heating the plastic and bending it to the proper shape I riveted so it would retain the shape and make it strong. To attach the luggage rack to the metal rack, the luggage rack needed a bracket system that would easily clip onto the metal rack and wouldn’t accidentally come off over rough road. Of course I used plastic barrel to make the brackets. The bracket is a kind of “Z” shape and the top bracket is a flat piece riveted along the top. They are just wide enough to fit between the two vertical supports on the metal rack and slip over the conduit on the bottom and the horizontal bar at the top. To keep the plastic racks from bouncing off the metal racks, I made a “L” bracket out of plastic, then cut a slot through the back of the luggage rack and “Z” bracket attached on the back. The slot was cut just below the top horizontal cross piece on the metal rack. I attached the “L” bracket with rivets to the luggage rack so that the short part of the “L” bracket will slip through the slot, under the horizontal cross-piece and though the “Z” bracket. The plastic “L” bracket is kind of spring loaded and stays through the slot until you’re ready to remove the luggage rack.
20” carry-luggage is pretty typical and I was able to find one at Goodwill for a $5. The other one I bought a matching one at Walmart for $20. I removed the wheels on the bags and they slipped perfectly into the plastic luggage racks. I added two straps on each luggage rack to hold the bags securely in the racks.
The carry-on’s looked pretty good, but they weren’t waterproof or dust proof. We had acquired some bright yellow material that school crossing flags are made out of when we owned a screen printing business and I had some left over. Using that and some water resistant material I bought at a fabric store, I sewed together some slip on covers for the bags (see top picture). That’s right, I sewed. Gentlemen, if a sewing machine is not part of your power tool assortment, your assortment is not complete.
I have used the racks and panniers for three years now and they have worked great. They are light weight, durable, flexible, inexpensive and not too bad looking. I never remove the metal racks. They act as rear-end crash bars and have saved my bike from damage more than once.
Anyway…for what it’s worth.